Technical Specs

-21-
 Call divert: this network function enables you to forward incoming calls to another number you
have previously specified.
 Call waiting: After you choose Activate, the mobile phone will contact the network. A moment
later, the network will make a response and send a message to acknowledge your operation. If the call
waiting function is activated, the network will alert you and the mobile phone screen will display the
incoming call number if others are calling you while you are already in a conversation.
 Call barring: The call barring function enables you to bar calls as needed. When setting this
function, you need to use a network barring code, which can be obtained from the network operator. If
the code is wrong, an error message will be prompted on the screen. After selecting a call barring option,
continue to select Activate or Deactivate. The mobile phone will prompt you to input the call barring
code and then contact the network. A moment later, the network will make a response and send the
operation results to the mobile phone.
 Hide ID: You can select hide ID, display own ID and or display ID by network.
 Others: You can set Auto call record, Incoming call voice, Dial Num voice, auto redial,
Any-key answer, call time minute reminder, Reject by SMS through this function.
Phone settings
 Date & time: Set the time, set the date, time format, date format Time zone and detail time of
the location.
Note: If you remove the battery from the mobile phone or if the battery energy was exhausted a long
time ago, you may need to reset the date and time when re-inserting the battery or powering on the mobile