User's Manual

11
11. Internet
¾ Internet Browser.
¾ Option: You can enter the Homepage and modify the default settings, like the Account settings.
12. Appendix
12.1. FAQ
The phone cannot be turned on: When the battery is very low, the phone may not be turned on properly. Please
charge the battery.
Cannot make certain calls:
Check if Call Barring is set. If it is set, you may not be able to make calls or only certain
calls are allowed.
My call is picked up by another phone:
Check if call divert is set. If it is set, your incoming calls may be diverted
to other numbers or devices.
12.2. Error Message
Please insert SIM card
Make sure you have inserted SIM card. If you have installed it but it cannot be detected, please try clean the golden
contacts of the SIM card by using a dry cloth. If it still is not working, please contact your network carrier.
No service
If you are in an area not covered by your network, or if a physical obstacle is present, such as in an enclosed area, the
message “No service” will be displayed on your Standby screen and you will not be able to make or receive calls. You
can try move closer to a window for better reception.
For emergency only: When you are outside your network but inside other network, you can only make emergency
call.
Enter PUK code
After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.
Contact your service provide
FCC Warning
Specific Absorption Rate (SAR) information:
SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its
highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operating can be well below the maximum value, in general, the
closer you are to a wireless base station antenna, the lower the power output.