W1000 INSTALLATION GUIDE W1000 Consumer Cellular Signal Booster INSTALLATION GUIDE Content 1. Signal Booster Improves Cellular Signals ................................................................................................................. 2 2. Signal Booster Package ................................................................................................................................................... 4 1) KITS list and function ......................................................
W1000 INSTALLATION GUIDE 1. Signal Booster Improves Cellular Signals In our real life, we practice to install signal booster to eliminate the problems that UE can’t receive signal from cell tower as construction material or other blocks. As figure show: we install one donor antenna at a location outside of the home or building where the strongest cell signal is present. The donor antenna receives and sends that weak signal via coax cable to a signal booster located indoors.
W1000 INSTALLATION GUIDE FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
W1000 INSTALLATION GUIDE The maximum antenna gain should less than 10dBi 2. Signal Booster Package 1) KITS list and function Picture Description Function Donor antenna and Dome sever antenna Coax cable Donor antenna is installed in outside, receive signal from cell tower and Dome sever antenna is mounted in ceiling or wall.
W1000 INSTALLATION GUIDE Final Gain Less Loss (dB) 6 6 6 5 5 Wide Band Directional Antenna 11dbi Antenna with 75' 400 N male Antenna Gain (dBi) 10 10 10 Coax Cable Loss (dB) 3 3 3 Final Gain Less Loss (dB) 7 7 7 Kit numbers: WD11-75400 11 11 4.5 4.5 6.5 6.
W1000 INSTALLATION GUIDE Coax Cable Loss (dB) Final Gain Less Loss (dB) 7.5 2.5 7.5 2.5 10.7 -0.7 11.3 -0.3 Wide Band Directional Antenna 11dbi Antenna with 50' 200 N male Antenna Gain (dBi) 10 10 10 Coax Cable Loss (dB) 5.0 5.0 7.1 Final Gain Less Loss (dB) 5.0 5.0 2.9 11.3 -0.3 Kit numbers: WD11-50200 11 11 7.5 3.5 Wide Band Directional Antenna 11dbi Antenna with 30' 200 N male Antenna Gain (dBi) 10 10 10 Coax Cable Loss (dB) 3.0 3.0 4.3 Final Gain Less Loss (dB) 7.0 7.0 5.7 7.5 3.
W1000 INSTALLATION GUIDE Panel Antenna with 50' 300 N male Antenna Gain (dBi) Coax Cable Loss (dB) Final Gain Less Loss (dB) 8 3 5 Kit numbers:WP10-50300 8 8 3 3 5 5 10 4.6 5.4 10 4.6 5.4 Panel Antenna with 30' 300 N male Antenna Gain (dBi) Coax Cable Loss (dB) Final Gain Less Loss (dB) 8 1.8 6.2 Kit numbers:WP10-30300 8 8 1.8 1.8 6.2 6.2 10 2.8 7.2 10 2.8 7.2 10 10 15.0 -5.03 15.0 -5.03 10 11.27 10 11.27 -1.3 -1.3 10 10 7.5 2.5 7.5 2.5 10 10 4.3 3.7 4.5 5.5 4.5 5.
W1000 INSTALLATION GUIDE Coax Cable Loss (dB) Final Gain Less Loss (dB) 2 4.5 3 6.4 3 6.4 9.4 1.8 7.6 9.4 1.8 7.6 Omni Antenna with 100' 300 N male Kit numbers:WO10-100300 Antenna Gain (dBi) 6.5 6.5 6.5 Coax Cable Loss (dB) 6 6 6 Final Gain Less Loss (dB) 0.5 0.5 0.5 9.4 9.2 0.2 9.4 9.2 0.2 Omni Antenna with 75' 300 N male Antenna Gain (dBi) Coax Cable Loss (dB) Final Gain Less Loss (dB) Kit numbers:WO10-75300 6.5 6.5 6.5 4.5 4.5 4.5 2 2 2 9.4 7 2.4 9.4 7 2.
W1000 INSTALLATION GUIDE Omni Antenna with 30' 200 N male Antenna Gain (dBi) Coax Cable Loss (dB) Final Gain Less Loss (dB) 6.5 Kit numbers:WO10-30200 6.5 6.5 3.0 3.5 3.0 3.5 4.3 2.2 9.4 9.4 4.5 4.9 4.5 4.9 Wide Band Directional Antenna with 100' 400 N male Antenna Gain (dBi) 8 Coax Cable Loss (dB) 4 Final Gain Less Loss (dB) 4 8 4 4 Kit numbers:WD9-100400 8 9.5 4 6 4 3.5 9.5 6 3.
W1000 INSTALLATION GUIDE Final Gain Less Loss (dB) -1.9 -1.9 -6.2 -5.5 -5.5 Wide Band Directional Antenna with 75' 200 N male Antenna Gain (dBi) 8.0 Coax Cable Loss (dB) 7.5 Final Gain Less Loss (dB) 0.5 Kit numbers:WD9-75200 8.0 8.0 9.5 9.5 7.5 0.5 11.3 -1.8 Wide Band Directional Antenna with 50' 200 N male Antenna Gain (dBi) 8.0 Coax Cable Loss (dB) 5.0 Final Gain Less Loss (dB) 3.0 Kit numbers:WD9-50200 8.0 8.0 9.5 9.5 5.0 3.0 7.5 2.0 7.5 2.
W1000 INSTALLATION GUIDE 1 Dome Antenna with 75' 200 N male Antenna Gain (dBi) Splitter/Coax Loss (dB) Final Gain Less Splitter/Coax Loss (dB) 3.00 7.45 -4.45 Kit numbers:WO3-75200-50 3.00 3.00 3.00 7.45 10.65 11.27 -4.45 -7.65 -8.27 3.00 11.27 -8.27 1 Dome Antenna with 50' 200 N male Antenna Gain (dBi) Splitter/Coax Loss (dB) Final Gain Less Splitter/Coax Loss (dB) 3.00 4.97 -1.97 Kit numbers:WO3-50200-50 3.00 3.00 3.00 4.97 7.10 7.51 -1.97 -4.10 -4.51 3.00 7.51 -4.
W1000 INSTALLATION GUIDE 3 Dome Antenna with50' 200 N male & a 50 Ohm 3-Way Splitter Kit numbers:WO33-50200-50 Antenna Gain (dBi) 3.00 3.00 3.00 3.00 3.00 Splitter/Coax Loss (dB) 10.47 10.47 12.60 13.01 13.01 Final Gain Less Splitter/Coax Loss (dB) -7.47 -7.47 -9.60 -10.01 -10.01 3 Dome Antenna with30' 200 N male & a 50 Ohm 3-Way Splitter Kit numbers:WO33-30200-50 Antenna Gain (dBi) 3.00 3.00 3.00 3.00 3.00 Splitter/Coax Loss (dB) 8.48 8.48 9.76 10.01 10.01 Final Gain Less Splitter/Coax Loss (dB) -5.48 -5.
W1000 INSTALLATION GUIDE Antenna Gain (dBi) Splitter/Coax Loss (dB) Final Gain Less Splitter/Coax Loss (dB) 1 2 -1 1 2 -1 1 2 -1 1.5 3 -1.5 1.5 3 -1.5 1 Whip Antenna with 30' 400 N male Antenna Gain (dBi) Splitter/Coax Loss (dB) Final Gain Less Splitter/Coax Loss (dB) 1 1.2 -0.2 Kit numbers:5-30400-50 1 1 1.5 1.2 1.2 1.8 -0.2 -0.2 -0.3 1.5 1.8 -0.3 2 Whip Antenna with100' 400 N male & a 50 Ohm 2-Way Splitter Kit numbers:WW12-100400-50 Antenna Gain (dBi) 1 1 1 1.5 1.5 Splitter/Coax Loss (dB) 7.
W1000 INSTALLATION GUIDE 3 Whip Antenna with30' 400 N male & a 50 Ohm 3-Way Splitter Kit numbers:WW13-30400-50 Antenna Gain (dBi) 1 1 1 1.5 1.5 Splitter/Coax Loss (dB) 6.7 6.7 6.7 7.3 7.3 Final Gain Less Splitter/Coax Loss (dB) -5.7 -5.7 -5.7 -5.8 -5.8 4 Whip Antenna with100' 400 N male & a 50 Ohm 4-Way Splitter Kit numbers:WW14-100400-50 Antenna Gain (dBi) 1 1 1 1.5 1.5 Splitter/Coax Loss (dB) 10.5 10.5 10.5 12.5 12.5 Final Gain Less Splitter/Coax Loss (dB) -9.5 -9.5 -9.
W1000 INSTALLATION GUIDE damage your equipment. 2) Signal Booster W1000 Datasheet Specification AWS Band: DL: 2110-2155 MHz Cellular Band: Frequency Range UL: 1710-1755MHz DL: 869-894 MHz UL: 824-849MHz Lower 700MHz: DL: 728-746 MHz UL: 698-716MHz Upper 700MHz: DL: 746-757 MHz UL: 776-787MHz PCS Band: DL: 1930-1995 MHz UL: 1850-1915MHz Max.
W1000 INSTALLATION GUIDE AC Supply 110/220 VAC, 50/60 Hz Power Consumption 24W MTBF 100000 hours Monitoring Standard Local management and supervising Local access via USB or Bluetooth (Mobile APP) Remote management and supervising Remote access via Wireless WIFI as optional Alarm Yes, amplifiers status, isolation status, temperature, AGC, RF overload etc.
W1000 INSTALLATION GUIDE RF safety warning: any antenna used with this device must be located at least 8 inches from all persons. ꙬWARNING. This is a consumer device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
W1000 INSTALLATION GUIDE un emplacement fixe à l’intérieur d’un bâtiment; Register your cellular booster with your wireless carrier at the following urls: Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.com/attsignalbooster.com/ T-Mobile: https://support.t-mobile.com/docs/DOC-9827 Sprint: https://www.sprint.com/legal/fcc_boosters.html U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp 3.
W1000 INSTALLATION GUIDE Smart AGC introduction The intelligent AGC function of the device refers to the function of the device to intelligently adjust the device gain according to the spatial wireless signal environment to avoid damage or interference with the base station due to the self-excitation of the device. This function mainly includes the following two stages: 1.
W1000 INSTALLATION GUIDE 3) Signal Booster Oscillation Avoidance Signal booster is two-way (full duplexer) amplifier.so donor antenna and sever antenna should be adequate isolation to prevent any feedback “oscillations”. We take MIC and speaker for example to clear understanding, when we put MIC near speaker, the speaker produces sharp scream. In order to ensure signal booster work normally, the isolation between donor antenna and sever antenna is bigger 10-15dB than signal booster gain.
W1000 INSTALLATION GUIDE meter, try to raise the height of donor antenna. b) Horizontally distance: the distance between donor antenna and sever antenna keep over 20-30 meters, better separated by wall c) Horizontally and vertical combination: presume above two ways fail, combine them.
W1000 INSTALLATION GUIDE 6) Installing the Inside Panel Antenna(s) Panel antenna has certain directivity, if it is mounted in wall, preferably in the center of where the signal needs to be amplified. If sever antenna is put in ceiling, it can be only put in where in the center of coverage area. but the signal strength will be little weak and coverage area will be smaller. Sever antenna can’t “see” the location where panel antenna be mounted and have enough safety isolation distance.
W1000 INSTALLATION GUIDE ➢ Drill four holes on the wall using the position of you choose, fix expansion bolt in the holes ➢ Install booster on expansion bolt by screw ➢ Connect power cable to booster power port ➢ Fix booster tightly, and check out the booster working indicator lamp 8) Check the System Connection Correctly 23 / 27 HONG KONG KONING INDUSTRIAL LIMITED Tel:0086-755-2906 9062 E-mail:rick@wisdomfer.
W1000 INSTALLATION GUIDE 4. Post Install Setup After signal booster installation finish, we will set signal booster according to scene environment to ensure system work normally. Wisdom APP can help you to make setting and adjustment effectively after you install the APP in your smart phone. 1) Install APP The device built-in Bluetooth&WIFI module, User can connect the device with phone by Bluetooth to run our APP.
W1000 INSTALLATION GUIDE 2) APP Interface Guide a) Click the name of booster and enter the interface. b) Click “more detail” to know every sub-band performance 25 / 27 HONG KONG KONING INDUSTRIAL LIMITED Tel:0086-755-2906 9062 E-mail:rick@wisdomfer.
W1000 INSTALLATION GUIDE i. ii. Band Enable can switch off or switch on the frequency Click MGC will get “set” interface, to set up the gain of uplink or downlink. 26 / 27 HONG KONG KONING INDUSTRIAL LIMITED Tel:0086-755-2906 9062 E-mail:rick@wisdomfer.
W1000 INSTALLATION GUIDE 3) Use APP to set and adjust signal booster Note: Please refer to page 8 “Signal Booster Oscillation Avoidance”. 27 / 27 HONG KONG KONING INDUSTRIAL LIMITED Tel:0086-755-2906 9062 E-mail:rick@wisdomfer.