Installation Guide

18 / 27 HONG KONG KONING INDUSTRIAL LIMITED
Tel:[phone]
E-mail:[e-mail]
W1000 INSTALLATION GUIDE
un emplacement fixe à l’intérieur d’un bâtiment;
Register your cellular booster with your wireless carrier at the following urls:
Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html
AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
T-Mobile: https://support.t-mobile.com/docs/DOC-9827
Sprint: https://www.sprint.com/legal/fcc_boosters.html
U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
3. Installation
1) Donor Antenna Installation
The main function of signal booster to amplify the weak signal from cell tower, “signal amplify” is multiplication
algorithm: “input power x gain=output power” the gain rate is default before factory setting .so the stronger
outside signal strength, the greater output power (good output power ensues better inside coverage area)
The outside air signal strength by donor antenna affect inside coverage area remarkably, different location,
floor, antenna mounted direction will influence the strength of outside signal by donor antenna
⚫ Proper aiming of the outside antenna towards the source of the cell signal is very
important. Generally, outside the building signal is good, so outside antenna be mounted
at veranda or open view area, facing toward cell tower
⚫ Cell tower height is at the height of 6-10 floor mostly .so under 10 floor building, try to find
open view area to mount outside antenna. Above 10 floor, try to find veranda or platform
to mount the outside antenna.
⚫ Outside antenna location.
The cell phone show full bar. If possible, use engineering
cell phone 。To test and choose the strongest signal point
⚫ constant 3 times successful dial and High-quality phone
talking, at the same time have fast data. Finally chose
great place to install outside antenna
⚫ The outside antenna direction should be facing toward cell tower