User's Manual

ManualsBrandsHONG KONG NATURAL SOUND ELECTRONICS ManualsElectronicsMID

Quick Start Guide

10.1” Quad Core Tablet

Follow the esay steps shown inside to get

your Trio Tablet up and running.

STEP 1:CHECK OUT THE CONTROLS

Before you do anything else,take a good look around

your TRIO Tablet and find out where all the contaol

buttons and other items of interest are.

Summary of content (7 pages)

PAGE 1
Quick Start Guide 10.1” Quad Core Tablet Follow the esay steps shown inside to get your Trio Tablet up and running. STEP 1:CHECK OUT THE CONTROLS Before you do anything else,take a good look around your TRIO Tablet and find out where all the contaol buttons and other items of interest are.
PAGE 2
Step 2: CHARGE THE BATTERY You need to charge up the battery before you use your TRIO Tbalet for the first time. Connect the charger to your TRIO,using the USB/Charger cable.The cable plugs in to the USB/Charger Port at the bottom of your Tablet.
PAGE 3
The connection should look like this: Plug the charger into a power outlet.The screen will display a flashing battery symbol for a few seconds to show that the battery is charging.Keep the battery on charge for 6 to 8 hours to make sure that it is fully charged. STEP 3: POWER UP When the battery is fully charged,switch on your TRIO Tablet.
PAGE 4
The logo remains until the startup step is finished;the startup screen then appears: Touch the screen at the lock symbol and swipe sideways.This will unlock your tablet and display the desktop screen.
PAGE 5
Touch this symbol and the Apps screen appears.Touch any icon on the Apps screen and it will open the application that you have chosen.You are now up and running! More Information To find out more about your TRIO Tablet and its cool features, check out the user manual on the Trio website: www.triotablet.com/manual.
PAGE 6
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 7
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.