User's Manual

PC436User Manual
Ver 1.0 Page 8
Connecting PC and Data Transmission
With the supplied USB cable to connect the PC and MID automatically pop up a new
window, click on the “Open the USB storage device, enter the data transfer state.MID
memory card and SD card (if the card) can be found in the My Computer list. Data transfer
is complete, click”Turn off USB storage”, to exit the data transfer state.
Charge
The player uses high volume LiIon. You can connect MID and USB port of PC or other
attached adaptor in charging.
When the battery is low electricity: when the electricity is low level, MID will auto power off
after appearing prompted window, at this time, don’t start up the player and charge it
timely.
Use Micro SD card
After connecting the player and PC, you will find two removable disks, the front one is the
built-in-memory disk, the other one is Micro SD card disk. If there is no card plugged in,
the second disk cannot be opened. The player supports up to 32GB Micro SD card
expansion.
Plug-in: face the front side (the side with prints) Micro SD card upwards (the direction in
which the machine’s display screen faces) and connect it with the machine by plugging it
with slight force into the card slot of the machine. Now the machine can play the files in
the card.
Plug-out: push Micro SD card inwards slightly, it will spring back for certain length, and then