User's Manual

77
H8951
-
NA1
3G/4G Router User
Manual
Parameter Details Operation
Redistribute
Kernel
Enable or disable Redistribute
Kernel
Click the button to select

Enable

Disable
Step 3 Click “Add” to add a new OSPF route, configuration interface as Figure 5-56.
Figure 5-41 OSPF route configuration interface
Step 4 Configure RIP route parameter instruction, as Table 5-29.
Table 5-27 OSPF route parameter instruction
Parameter Details Option
Add Type
Add the type of OSPF
route
Click the button to select Add Type

Network

Neighbor

Interface

When
Add Type is “Network”,
Network
Set the network address
as ospf sending address
Manual input
Format1: A.B.C.D/Mask
AS Number
Used to identify the
network (only the routers
with the same domain
address can exchange
routing information)
Manual input
Value area:[0,65535]
When Add Type is “Neighbor”,
Neighbor
The router can reach in
the next hop
Manual input
Format1: A.B.C.D/Mask
When Add Type is “Interface”,