User's Manual

88
H8951
-
NA1
3G/4G Router User
Manual
Parame
ter
Details Operation
Select
To select which phase of
IPSec, phase 1, phase 1 or
phase IPSec
Select “IPSec”
Interfac
e Name
Name of this phase Input name
Match
Phase1
To select a matching name
of “phase1”
Select from Dropdown List.
Match
Phase2
To select a matching name
of “phase2”
Select from Dropdown List
Destinat
ion IP or
Domain
counterpart IPSec server IP
or domain
Input counterpart IPSec server IP or
domain
Encrypti
on
Interfac
e
To select binding interface of
IPSec. to bind
VPDN/modem/br0 as local
interface of IPSec initial can
support IPSec OVER VPDN. In
addition, after binding, IPSec
rule will change as per the
charge of binding interface.
Thus can resume link of
IPSec dialing interface and
keep IPSec linked as soon as
possible
Select from Dropdown List
---END
5.6.5 OpenVPN Configuration
OpenVPN is the VPN achievement based on the OpenSSL library's application layer.
Compared with the traditional VPN, it is simple and easy to use. OpenVPN all the
communications are based on a signal IP port, and it use the UDP protocol transports
default and recommended. It can also support the TCP protocol. OpenVPN connection can
through most of the proxy servers and work well in the NAT environment. Its server side
has the function of pushing some network configuration information (including IP address,
route configuration and so on) to the client side. OpenVPN offers two types of interfaces
for networking via the universal TUN/TAP driver. It can create either a layer-3 based IP
tunnel (TUN), or a layer-2 based Ethernet TAP that can carry any type of Ethernet traffic.
Port 1194 is the official IANA (Internet Assigned Numbers Authority) assigned port
number for OpenVPN.
Step 1 Login WEB GUI.
Step 2 Click "VPN >OpenVPN".Enter "OpenVPN" page, as shown in Figure 2-4.