User's Manual

66
H8951
-
NA1
3G/4G Router User
Manual
Parameter Details Operation
Original port
The port of external IP,
the port need to be
replaced
Value area: 1~65535
Mapping
address
Internal IP address e.g. 192.168.8.1
Mapping port
The port of Internal IP
address
Value area :1~65535
Step 5 Single click “save” icon to finish.
---END
SNAT configuration rule
SNAT is the source address translation, and its role is to translate source address of IP
packets into another address.
Step 1 Log-on WEB GUI of H8951-NA Cellular Wi-Fi Router.
Step 2 Click “Forward > NAT” to open “NAT” tab.
Step 3 NAT Type select “SNAT”, Configuration interface as shown in Figure 5-47.
Figure 5-32 SNAT rule configuration
Step 4 Configure SNAT rule parameter.
Parameter instruction as Table 5-22