User's Manual

93
H8951
-
NA1
3G/4G Router User
Manual
To see “local log”, “remote log” must be enabled.
---END
5.7.3 Remote Log
Step 1 Log-on WEB GUI of H8951-NA Cellular Wi-Fi Router.
Step 2 Click “System > Remote Log” to open “Local Log” tab.
Figure 5-52 Remote Log tab
Step 3 Configure “Remote Log” parameter.
Table 5-34 Remote log parameter instruction
Parameter Details Operation
Log Status To enable or disable remote log Click “Enable”
Remote IP or
Domain
IP address or Domain of remote log
server
To input the IP address
or domain to receive log
Remote Port Port of remote log serve Default port: 514
Step 4 Single click “save” icon to finish “Remote Log” parameter configuration.
The software tool Syslog is use to receive remote log in server. Syslog can be downloaded from the
Internet by searching “MT_Syslog.exe”.
---END