User's Manual

H8951

NA1

3G/4G Router User

Manual

Step 3 Click “Browse” to select upgrading file and then click “Upgrade”.

---END

CFE mode upgrading

If upgrading file is larger than 6MB, CFE mode upgrading shall be used to upgrade.

Step 1 Add an IP address 192.168.1.

Figure 5-58 Add an IP address

Step 2 Press the RESET/DEF interface. Do not release it. Hold it, meanwhile power on router, till

30 seconds, and connection to PC is built properly. Then release RESET/DEF interface

Step 3 Input 192.168.1.1 in your browser, click “enter” you will see following page. If not, start

over again from step 1.