User's Manual

(2014-07-01)
- 99 -
H8951 3G 4G router 5 Router config
Step 3 Click “Browse” to select upgrading file and then click “Upgrade”.
---END
CFE mode upgrading
If upgrading file is larger than 6MB, CFE mode upgrading shall be used to upgrade.
Step 1 Add an IP address 192.168.1.
Figure 5-71 Add an IP address
Step 2 Press the RESET/DEF interface. Do not release it. Hold it, meanwhile power on router, till 30
seconds,and connection to PC is built properly. Then release RESET/DEF interface.
Step 3 Input 192.168.1.1 in your browser, click “enter” you will see following page. If not, start over
again from step 1.