User's Manual

H8951 3G 4G router 3 Installation of H8951 3G 4G router
(2014-07-01)
- 25 -
After change the LAN IP, if page has no response anymore, please make sure your PC address is in the
same network segment, or set a new IP to your PC to insure that.
---END
5.2.2 WAN
Wired connect to Internet by static IP, DHCP or PPPoE.
Step 1 Login H8959-4GSPT WEB GUI.
Step 2 Single click “network > WAN”.
Figure 5-15 WAN window
Step 3 WAN connection type.
Table 5-5 WAN connection type parameter instruction
Parameter
Details
Operation
Connection Type
WAN Connection Type
Dropdown List Selection:
⚫
Static IP: Manual set WAN IP, if set
static IP, need manual set gateway,
DNS.etc.
⚫
DHCP: DHCP get IP address
⚫
PPPoE: PPPoE dial to get IP, usually
you need connect to a ADSL modem
”Connection Type”select”Static IP”
IP
Configure the static IP
Manual input Format ：
A.B.C.D/Mask
IP1 default：192.168.10.1/24
”Connection Type”select”DHCP”