User's Manual

(2014-07-01)
- 44 -
Parameter
Details
Operation
DHCP Server
Enable or Disable DHCP feature
⚫
Enable
⚫
Disable
Basic Settings（DHCP is not recommended configure in the case of no special network
requirement)
IP Pool
The DHCP client can get the scope of IP
address. When selecting interface
represents the interface of network
segment. This option is usually the need
to specify a machine configuration can
be assigned address range, for example:
only hope at most four machine can
automatically obtain the IP
Dropdown List
⚫
br0
⚫
custom
Start IP
When IP pool select custom
configuration, configure the DHCP pool
Manual input
Figure 5-28 DHCP
Step 3 Configure DHCP parameter.
DHCP parameter instructions as Table 5-8.
Table 5-11 DHCP Parameter