User's Manual

(2014-07-01)
- 52 -
Parameter
Details
Operation
configuration successfully, the router
reported Trap IP packet source address
is the loopback address, If the
"Loopback Status" to "Disabled" means
router IP packet source address for the
LAN port address
⚫
Diable
Step 4 Single click “save” icon to finish SNMP configuration.
MIB for SNMP can be downloaded from our website, if necessary, please contact our technical
engineers.
---END
5.3.4 M2M configuration
H8959-4GSPT Cellular router has embedded a WMMP (Wireless Machine-to-Machine
Protocol)
protocol to realize communication with M2M (Machine-to-Machine) platform which can
remotely monitor and manage the routers and its network, e.g. visit the router, patch
upgrading, firmware upgrading, parameter configuration, monitor the network strength, time
delay, flow. Its configuration is as follows:
Step 1 Log-on WEB GUI of H8959-4GSPT Cellular router .
Step 2 Click “Applications > M2M” to open M2M configuration tab.