User's Manual

• Close the bottle tightly after use.

Performing a Control Test

1. Remove test strip from the test strip vial (or the foil pouch). Tightly close the

vial cap immediately after you have removed the test strip.

Note: Check the expiration and discard dates of the test strips. Do not use the

expired test strip.

2. Insert a test strip into the meter in the direction of the arrows.

3. The meter turns on after a beep. An image of a test strip with a flashing blood

drop will appear letting you know the meter is ready to test.

4. Shake the control solution bottle thoroughly. Squeeze the control solution

bottle gently and discard the first drop. Squeeze out a second small drop on

a clean nonabsorbent surface.

Note: Do not apply control solution to the test strip directly from the bottle.

5. Immediately touch the tip of the test strip to the drop of control solution. The

control solution is pulled into the test strip through the strip tip.

Note:

If the control solution sample does not fill the check window, do not add a second