User's Manual

7
The date will now flash. Press to adjust the date, press and hold until the
meter beeps to set, then it will shift to the next digit for setting. Repeat the above
action until the year setting is completed.
Note:
Before you first time use your meter system for testing, please adjust the meter
settings to set the date and time, ensuring that results stored in the memory are
shown with the correct date and time.
3. Set the Time
The hour will now flash. Press to adjust the current hour, press and hold
until the meter beeps to set, then it will shift to the next digit for setting. Repeat the
above action until the hour setting is completed.