TWS Earphones Instruction Manual
Specification Bluetooth 5.
Operation: Auto Power On, Auto Pair When take out the earphones from the charging case, The earphones will be Power On Automatically, after a few seconds, the 2 earphones will be pair automatically. And then you search the Bluetooth devices by your phones, will detect the earphones' name: i12. Click it to connect to your phones.
Touch one time the earphones: to pause the music and reply by touch again. Touch 2 time the earphones: to turn up/down the volume Touch 3 time the earphones: Next / Preview song 3, Power Off Long touch the earphones 5 seconds, then the earphones will be power off. It would be power off automatically when the earphones away from your Bluetooth device over 5 minutes, So do not worry the power exhausted. In Power off model, touch the earphones around 2 seconds, it will be Power On. 4, Charging: A.
Precautions 1. The earphones should be stored in a dry and ventilated environment, to avoid oil, water, moisture and dust affecting product performance. 2. Avoid using stimulus, organic solvents or items containing these ingredients to clean the earphones. 3. The use of earphones should be correctly as per the specification, pay attention to use the influence of environment on the earphones.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.