User's Guide

Using Software
Connect the modem to a computer to configure APN settings, select network connection mode,
update firmware, and reset the modem in the dedicated software for the modem.
1. Visit the official DJI website (https://www.dji.com ) and download the software in your computer.
The software supports Windows 7 or later.
2. Connect the USB-C port on the modem to the computer using a USB-C cable. The status indicator
lights up indicating connection is established.
3. Run the software. Go to each page in the software for corresponding configuration.
Specifications
Technical Standards
TDD-LTE CAT4/FDD-LTE CAT4/WCDMA HSPA+
Operating Frequency
Bands
TDD-LTE: B34/38/39/40/41 (194M)
FDD-LTE: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20
B25/B26/B28/B66/B71
WCDMA: B1/B2/B4/B5/B6/B8/B19
Max Output Power
TDD-LTE: 25 dBm
FDD-LTE: 25 dBm
WCDMA: 25 dBm
Interface
USB-C port
Nano-SIM card slot
TS-5 antenna ports
Antennas
Dual antennas
Dimensions
52.4×23.0×8.0 mm
Weight
Approx. 14 g
Operating
Voltage/Current
5 V, 1 A
Operating Temperature
-10° to 40° C (14° to 104° F)
Storage Temperature
-20° to 70° C (-4° to 158° F)