User Manual

EXPOSUR
E
BRIGHTNE
SS
SHUTTER
SENS-UP
AGC
RETURN
0 - 20
Auto-Normal /Deblur
Manual-1/30-1/30000
Flicker
Off/x2/x4/x8/x16/x32
0 -10
Brightness
Adjust the camera’s brightness from 0~20. The higher
the number, the brighter the image will appear.
SHUTTER
Select either AUTO, MANUAL or FLICKER.
• AUTO: Automatic shutter speed/control.
NORMAL: Set when the camera is installed in an
indoor environment.
DEBLUR: Set when the camera is installed in an
outdoor environment.
• MANUAL: Control the shutter speed manually (1/30-
1/30000).
• FLICKER: Select this when you experience picture
flicker, which can happen when there is a clash with the
frequency of the installed lighting.
SENS-UP
During low light situations, the camera will
automatically detect the light level and maintain a
brighter clear picture if this mode is activated.
AGC (Auto Gain Control)
The higher the gain level, the brighter the screen, but
the higher the noise.