User Manual

(iii) Adjust the contrast feature of the monitor.
(iv) Make sure that the screen is not exposed directly to
a bright light. Move the camera if necessary.
(v) The power supply voltage level may be unstable,
therefore, try another power supply.
(vi) Ensure the cables are correctly connected and/or
the cables are of the correct impedance.
d. The screen is flickering
(i) A fluorescent lamp's magnetic field may cause color
roll, therefore, reduce the number of fluorescent
lamps or increase the distance between the camera
and the lamps.
e. The camera surface is too hot and black stripes
appear on the screen.
Check if an appropriate power source to the camera
complies with the manufacturer’s standard requirement,
or if the voltage keeps changing.
We are here to help:
If you need further help email HONIC Technical
Support: [e-mail]
Camera Dimensions (mm)