User Manual

5. Adjusting Zoom and Focus
This cameras will come
from the factory set for the
wide field of view, meaning
that it has the low
magnification. Turn the
Zoom screw (near the lens)
anticlockwise to increase
the magnification and then
adjust the Focus until the
image is clear.
Note: The focus knob is very sensitive, so we
suggest you adjust zoom knob to the position you
need, then adjust focus knob to make it almost
clear, then adjust zoom knob again to make it 100%
clear.
Note: It can be difficult to know what the right zoom
and focus settings are and these adjustments are best
made when the camera is at its intended location. There
are several methods one can use to ensure proper
adjustments:
1. A second person located at the DVR, monitoring the
picture from the camera and communicating with the
person making the adjustments.