USER MANUAL HN-IRDN200F 1080P AHD/CVI/TVI/960H Hybrid Waterproof Camera
Product Description The HN-IRDN200F is a high-definition camera designed around a 1/2.7" Color 2.0 megapixel CMOS image sensor, 14µ x 18pcs IR LEDs providing infrared capability up to 65 feet, and a 3.6mm lens with wide angle field of view of 90 degrees. Notice Before Using Default Mode: 1080P AHD Video Output. If your DVR is TVI, CVI or Analog DVR, please switch the corresponding video output mode by OSD joystick.
Note: 5s means 5 seconds Installation and Operation: 1. Unpacking and Handling Each unit is shipped assembled and factory tested. Ensure that all accessories are removed from the container before discarding packing material. Package includes 1x dome camera 4x mounting screws 4x screw anchors 1x install guide 1x user manual 1x drill template 1x Allen wrench 2. Mechanical Inspection Inspect the front and rear of the equipment for shipping damage.
are broken, damaged, or loose. If equipment appears to be damaged or defective please contact us for assistance. 3. (i) Special Attention The installer must comply with electrical safety standards. There must be sufficient space between the camera's power supply and video line and any high voltage equipment and/or cables. (ii) To help ensure the camera's life and proper operation do not point the camera towards the sun or strong light.
voltage polarity and operating temperature must match requirement of this equipment. (vii) Only qualified installers are allowed to install, test and disassemble the camera. (viii) Any change to the camera's lens will affect image quality. (ix) The camera is a low voltage product. If installed outdoors, proper safety and lightening grounding are required. 4. (i) Wiring Connections Connect the power supply's DC plug to the camera's power outlet.
Note: Before connecting the power supply, please check its output voltage (12V).
Setup OSD Menu Press the OSD joystick to start the OSD menu in any video output mode, OSD menu will show on display as following: MAIN MENU AE AWB DAY NIGHT IMAGE ENHANCE VIDEO SETTING LANGUAGE FUNC RESET SAVE-EXIT EXIT OSD Functions and Options MAIN MENU BRIGHTNESS AE EXPOSURE GLOBE BLC
RETURN ATW AWB MODE MWB RGAIN BGAIN Gray World (Not Valid) RETURN AUTO DAY- MODE NIGHT Day/Night Switch Sensitivity COLOR MONO (B/W) RETURN IMAGE ENHANC E CONTRAST AUTO/MANUAL SHARPNESS AUTO/MANUAL SATURATE AUTO/MANUAL 3DNR AUTO/MANUAL D-WDR CLOSE/OPEN RETURN
HD AHD/CVI/TVI/CVBS VIDEO STANDARD HD:1080P 30 FOR NTSC SETTING APPLY&REBOOTHD:1080P 25 FOR PAL RETURN CVBS: NTSC/PAL LANGUA ENGLISH, CHINESE, KOREAN, RUSSIAN, etc FUNC GE PRIVACY & MOTION (PLEASE CHECK BELOW) RESET SAVE-EXIT EXIT BLC (Back Light Compensation): In images where a bright light source is behind the subject of interest, the subject would normally appear in silhouette. BLC allows the camera to adjust the exposure of the entire image to properly expose the subject in the foreground.
MWB (Manual White Balance): Adjust the red gain and blue gain manually to produce white accurately picture. Day Night Mode: a. AUTO: Provide color image at daytime and black and white image at nighttime automatically by AGC level. GAIN DAY/NIGHT: Sensitivity from low to high. GAIN NIGHT/DAY: Sensitivity from low to high. b. Color: Provide color image both at daytime and nighttime. c. MONO=B/W: Provide black and white image both at daytime and nighttime.
Saturate: Color gain means saturation, it is similar to contrast, however instead of increasing the separation between shadows and highlights, it increases the separation between colors. 3DNR (Digital Noise Reduction): DNR is a technique of removing image noise from a video signal by applying a digital comb filter. It reduces the noise that can be found in low light images and makes images clearer. This type of filter is sometimes confused by motion, resulting in blur trails. Standard: a.
3. Mask support red, blue and green colors. 4. Mask transparency optional. Motion: Monitor activity more efficient with this feature by means of highlighting moving objects with outlined box around the moving object. 1. On/Off Optional. 2. Support up to 4 areas, position and size adjustable. 3. Mask support red, blue and green colors. 4. Mask transparency optional. Reset: If you need factory reset all the OSD menu settings, choose reset option.
A: Press OSD toggle, choose BLC or Digital WDR based on your needs. DWDR is not real WDR. Q: Too much noise at night? A: 1. OSD menu—AE—Gain—Lower gain value 2. OSD menu—video setting—increase DNR value Side effect: Lower gain value make the image a little darker. High DNR may cause motion blur. Specifications Model No. HN-IRDN200F Video Output Mode AHD/CVI/TVI/CVBS Camera Image Sensor 1/2.
Focus Length 3.
Housing Metal, IP66 Bracket NO IR Cut Filter YES Operation Temperature 14F ~ 122F RH95% Max Storage Temperature -4F ~ 140F RH95% Max Power Source DC12V±10%, 700mA Dimension ￠94.5 x 76(H) mm Weight 450g *Stated maximum IR range is based on ideal conditions in typical outdoor environment. Actual range and image clarity depends on installation location, viewing area and light reflection / absorption level of object. Trouble Shooting a.
b. No picture or only black and white picture after applying power (ii) Check all plugs and cables are securely connected to the proper connectors. (iii) Ensure your power supply is providing the correct voltage and current. (iv) Ensure switch the camera video output mode to correspond your DVR video type. (v) Ensure your AHD DVR is 1080P or 1080N, CVI and TVI DVR is 1080P. c. The picture has ripples (i) Check to see if the power supply is experiencing AC ripple, if so a filter may be required.
e. The picture background continuously changes color (i) A fluorescent lamp's magnetic field may cause color roll, therefore, reduce the number of fluorescent lamps or increase the distance between the camera and the lamps. Camera Dimensions (mm) Frequently Asked Questions Q: What else do I need to make it work? A: This camera can output 1080P AHD, 1080P CVI, 1080P TVI and 960H signals, so you need: 1. One of 1080P(N) AHD DVR, 1080P CVI DVR, 1080P TVI DVR or 960H analog DVR.
2. 12V DV power supply. 3. Coaxial video cable with BNC connector. Q: Does this camera work with 720P DVR system? A: No, the video signal is 2MP 1080P, it could not work with 720P DVR. Q: Will the OSD switch stay in same mode if camera is powered off, or do you have to reset mode each time you power it back up? A: It will stay in the same output mode, do not need to reset each time. A: Why the color is black and white at daytime? A: Make sure the camera video signal match your DVR.
Q: How to reset camera when accidentally change NTSC to PAL and signal is gone A: Change DVR from NTSC to PAL, the signal will be back, then change the camera from PAL to NTSC by OSD menu, then change the DVR from PAL to NTSC back. Q: Is there a way to turn off the IR? I have sufficient light at night and would prefer that the IR not come on at all. A: There is NO switch to turn off the IR led, the light sensor detect ambient light constantly and turn on/off the IR led automatically.
A: It is not recommended, window glass could reflect IR light at night which will ruin the image completely. If you must mount it behind window glass, please check the QA just above this question. Warranty and Customer Service 60-Day Money-Back Guarantee for Any Reason You may return your undamaged product and packaging within 60 days of purchase to receive a FULL REFUND for any reason.
