User Manual

b. No picture or only black and white picture after applying
power
(ii) Check all plugs and cables are securely connected to the
proper connectors.
(iii) Ensure your power supply is providing the correct voltage
and current.
(iv) Ensure switch the camera video output mode to
correspond your DVR video type.
(v) Ensure your AHD DVR is 1080P or 1080N, CVI and TVI DVR
is 1080P.
c. The picture has ripples
(i) Check to see if the power supply is experiencing AC ripple,
if so a filter may be required.
(ii) Determine if the monitor is faulty.
(iii) Determine if other peripheral equipment is causing ripple
and if so make the necessary adjustments.
d. The picture appears smeared
(i) The power supply voltage level may be unstable, therefore,
try another power supply.
(ii) Ensure the cables are correctly connected and/or the cables
are of the correct impedance.