User Manual

mild detergent. Never use strong or abrasive
detergents.
(vi) A 12V DC 1A or 2A power supply must be used. AC
power cannot be applied. AC power will damage
the camera and void warranty. Power supply output
voltage, current, voltage polarity and operating
temperature must match requirement of this
equipment.
(vii) Only qualified installers are allowed to install, test
and disassemble the camera.
(viii) Any change to the camera's lens will affect image
quality.
(ix) The camera is a low voltage product. If installed
outdoors, proper safety and lightening grounding
are required.
4. Wiring Connections
(i) Connect the power supply's DC plug to the
camera's power outlet.
(ii) Connect the camera to the DVR with a 75Ω coaxial
video cable.
(iii) Connect power supply's AC plug to a suitable AC
power outlet.
(iv) Adjust the lens direction according to the required
surveillance area and environment.