User manual

To unlock the screen, simply place your nger on the ngerprint sensor. You can also customise the
screen unlock method by going to Settings > Security & privacy > Fingerprint ID > Unlock when
screen is off, and then selecting Rest nger or Press button.
l Pressing and holding the ngerprint sensor for 3 seconds will power off your device. You are
advised not to hold the sensor for too long when using the press to unlock method.
l When the screen is on, simply touch the ngerprint sensor to unlock the screen. If you press
the ngerprint sensor, the screen will turn off instead.
l If both ngerprint and facial recognition are enabled, you can use both methods
simultaneously to unlock the screen with maximum efciency.
To set your device to vibrate when your ngerprint is not recognised, go to Settings > Security &
privacy > Fingerprint ID, and enable Vibrate when ngerprint is not recognised.
Connect to Wi-Fi
By connecting your device to a Wi-Fi network, you can effectively save mobile data.
To avoid potential security risks (such as unauthorised access to your personal data and
nancial
information), please exercise caution when connecting to a public Wi-Fi network.
Connect to a Wi-Fi Network: Open Settings, go to Wireless & networks > Wi-Fi, and enable
Wi-Fi. Touch a Wi-Fi network to access it, and enter the network password or complete the
authentication if required. Alternatively, you can scroll to the bottom of the menu, touch Add
New Device
13