User manual

Table Of Contents
NFC
For example, when pairing Bluetooth devices, enable NFC, Huawei Beam, and Bluetooth on both
devices. Open the Bluetooth pairing screen on both devices and place the NFC detection areas of
devices close together. When the transmitting device plays an audio prompt and the transmitting
screen shrinks, follow the onscreen instructions and touch the screen on the transmitting device to
establish a Bluetooth connection.
If there is a Read and write/P2P switch on the NFC screen, ensure that it is also enabled.
Features may vary depending on your network provider.
Desktop Mode
Connect Your Phone to an External Display
In a wireless manner, your Phone can be connected to an external display.
By using one of the following methods, your Phone can be connected to an external display:
l If the external display supports Miracast, you can turn on the Wi-Fi of your Phone and connect your
Phone to the external display.
l If the external display does not support Miracast, you can use a wireless HDMI adapter to connect
your Phone and the display. Insert the wireless HDMI adapter into the HDMI interface of the
external display and connect the power cable to the wireless HDMI adapter. After the wireless HDMI
adapter works properly, open Settings on your Phone, go to Device connectivity > Easy
Device Connection
78