User manual

l Transfer images: Picture Transfer Protocol (PTP) is a protocol that allows you to transfer images.
You can upload and share photos between your Phone and computer using this connection
method.
Swipe down from the status bar to open the notication panel, and then set your USB connection
method to Transfer photos. Your computer will automatically install the necessary drivers. After
the installation is complete, click the new drive icon named Phone on the computer to view the
images on your Phone.
l Transfer MIDI data to your Phone: MIDI (Musical Instrument Digital Interface) is an industry
standard audio format for composing music established by electronic instrument manufacturers.
Swipe down from the status bar to open the notication panel, and then set your USB connection
method to Input MIDI. You can then use Phone to receive and process MIDI messages transmitted
by other devices.
Transfer Data Between Your Phone and a USB Device
USB OTG (USB On-The-Go) lets you transfer data directly between your Phone and other devices (such
as phones, tablets, cameras, and printers) without requiring a computer. You can also use an USB OTG
cable to connect your Phone directly to a USB storage device and transfer les.
Transfer data between your Phone and a USB storage device
You can use an OTG cable to access USB storage devices (including USB drives and card readers)
directly from your Phone.
1 Connect the USB drive to your Phone using a USB OTG cable.
Device Connection
67