Quick Start Guide
Table Of Contents
- Know Your Device
- Before using the device, familiarize yourself with its basic operations.
- •To power on your device, press and hold the power button until the screen turns on.•To power off your device, press and hold the power button, and then touch .•To restart your device, press and hold the power button, and then touch .
- Volume buttonPower button/Fingerprint sensorUSB Type-C portCard slotHeadset jack
- Getting Started
- •Be careful not to scratch your device or hurt yourself when using the eject pin.•Store the eject pin out of the reach of children to prevent accidental swallowing or injury.•Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot).•If your SIM card does not match your device, please contact your carrier.
- Follow the instructions in the following figures to set up your device. Please use the eject pin included.Ensure that the card is correctly aligned and its notch is first inserted into the card tray.
- Single-SIM card:Dual-SIM card:
- SIM Card Management
- For More Information
- If you encounter any problems while using your device, you can obtain help from the following resources:
- •Visit https://www.hihonor.com to view device information and other information.•Visit https://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region.•Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal, Safety information, Authentication info, Certification logos.
- Safety Information
- Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.
- Operation and safety
- Disposal and recycling information
- Reduction of hazardous substances
- RF Exposure Information
- The World Health Organization has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
- For the countries that adopted the SAR limit 2.0 W/kg over 10 gram of tissue.The device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body.CHL-LX1: The highest reported SAR value: Head SAR: 0.84 W/kg; body SAR: 1.09 W/kg.CHL-LX2: The highest reported SAR value: Head SAR: 1.12 W/kg; body SAR: 1.19 W/kg.
- For the countries that adopted the SAR limit 1.6 W/kg over 1 gram of tissue.The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body.CHL-LX1: The highest reported SAR value: Head SAR: 0.84 W/kg; body SAR: 0.45 W/kg; hotspot SAR: 1.05 W/kg.CHL-LX3: The highest reported SAR value: Head SAR: 0.86 W/kg; body SAR: 0.51 W/kg; hotspot SAR: 1.02 W/kg.
- EU regulatory conformance (only applies to CHL-LX1 / CHL-LX2)
- StatementHereby, Honor Device Co., Ltd. declares that this device CHL-LX1 / CHL-LX2 is in compliance with the following Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP 2009/125/EC.The full text of the EU declaration of conformity, the detailed ErP information and most recent information about accessories & software are available at the following internet address: https://www.hihonor.com/global/legal/certification/.This device may be operated in all member states of the EU.Observe national and local regulations where the device is used.This device may be restricted for use, depending on the local network.
- Restrictions in the 5 GHz band:The 5150 to 5350 MHz frequency range is restricted to indoor use only in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI).
- Frequency Bands and Power
- FCC statement
- Legal Notice
- A
Know Your Device
Before using the device, familiarize yourself with its basic
operations.
• To power on your device, press and hold the power
button until the screen turns on.
• To power off your device, press and hold the power
button, and then touch
.
• To restart your device, press and hold the power button,
and then touch
.
Volume button
Power button/Fingerprint
sensor
USB Type-C port Card slot
Headset jack
• Only CHL-LX1 supports NFC. Please keep the NFC
area close to other devices or objects while using
the NFC function.
1
荣耀终端信息资产
仅供TUV莱茵公司使用
禁止外传