User manual

Table Of Contents
When shooting in bright sunlight, select . In low-light environments, select .
Tap to adjust the color temperature, giving a cooler or warmer tone to the image.
2 You can tap to select and apply a LUT filter.
3 Tap to begin recording.
Adjusting some settings may cause other settings to change accordingly. Please adjust carefully
according to your needs.
Record and Edit LOG Videos
With LOG recording, you can record more detail, wider dynamic range, and keep more details in
extremely bright and dark areas. LUT filters make your video clearer, richer, and more textural.
1 In PRO mode, tap to switch to the recording mode. Tap to enable LOG mode.
2 Adjust parameters in the Pro mode according to your needs.
3 Tap to start recording, tap to pause recording, or tap to end recording.
4 Open the LOG video and tap > to add filters.
5 After editing, tap .
Record Videos
Shoot Videos
In the video mode, you can use auxiliary functions such as zoom, focus, and beauty, and you
can also set the video resolution and frame rate.
1 Open Camera and select VIDEO mode.
2 You can do any of the following to prepare for the shooting:
Zoom in or out: Open/pinch both fingers on the screen or slide the zoom bar to zoom in or
out.
Focus: tap in the screen where you want to highlight. Press and hold in the screen to lock
exposure and focus.
Turn the flash on or off: Tap to select the flash as (Always on) or (Off).
When recording with the front camera, you can select the flash to be (Always on) in
low light conditions. When turned on, the camera will ring fill in the light by boosting the
screen brightness to enhance the brightness of faces.
Camera and Gallery
42