User Manual

ManualsBrandsHonor ManualsOtherHONOR R3-FT400 Radio Car Bluetooth Box

R3-FT400 Bluetooth Box User Manual

V1.3 （October 25, 2020）

After June 2020, the Bluetooth module supports SPP and BLE

The role of the Bluetooth box:

The Bluetooth box has a built-in Bluetooth module. The APRS beacon data decoded by

the FTM400 or FTM100 is output to the Bluetooth module in the box through the

10-pin to 6-pin cable. The aprs software is installed on the mobile phone or tablet to

search for the Bluetooth module in the connection box. For example, APRSDROID is

connected to the Bluetooth box. The beacon received by the FT400 or FT100 can be

transmitted to the APRSDROID to see the map position, direction distance, etc.

Supported platform models: FTM-400D, FTM400XDR, FTM-100D

*You can also use DIY other cables to connect to KenwoodTM-D710 or other APRS

stations with

PACKET or NMEA WAYPOINT output.

Summary of content (8 pages)

PAGE 1
R3-FT400 Bluetooth Box User Manual V1.3 （October 25, 2020） After June 2020, the Bluetooth module supports SPP and BLE The role of the Bluetooth box: The Bluetooth box has a built-in Bluetooth module. The APRS beacon data decoded by the FTM400 or FTM100 is output to the Bluetooth module in the box through the 10-pin to 6-pin cable. The aprs software is installed on the mobile phone or tablet to search for the Bluetooth module in the connection box. For example, APRSDROID is connected to the Bluetooth box.
PAGE 2
FT M-400D Set the use steps: 1，Connect the FTM400 or FTM100 radio and power supply according to the picture.
PAGE 3
The red LED inside the box will flash or light up when the power is on. If there is no flash or long light, there is no power supply to the box. Red LED Red LED Blink = Long light = Bluetooth is not connected Bluetooth is connected 4. After the Bluetooth pairing is completed, the APRS program can be used in conjunction with (NMEA WAYPOINT format).
PAGE 4
Note2: APRSDROID program can only choose” NMEA waypoint”；Other APRS APP, please test and verify by yourself！
PAGE 5
After the setting is completed, enable: start Tracking. At this time, the red indicator light inside the Bluetooth converter box is long, indicating that the APRSDROID is connected to the Bluetooth converter box. When the FT400 receives the decoded beacon, it will immediately transmit to the APRSDROID via Bluetooth. To the APRS list, you can also see the specific location or trajectory of the other party through the APRS map in real time.
PAGE 6
Note 4: In IOS system, R3 internal Bluetooth BLE mode does not support Bluetooth manager search. The APP needs to support the Bluetooth BLE mode, and the R3-BLE connection will be automatically found in the APP R3 Bluetooth serial port transparent transmission test 1, Serial debugging APP name: JDY-LED or LIGHTBLUE ,Download in the Apple Store. JDY-LED Installed normally.
PAGE 7
R3 Bluetooth BLE test 2: APRS software test APP name: OvitalMap APP URL: https://www.ovital.com/ https://en.ovital.
PAGE 8
Peripheral Device Manager, BLE is connected OvitalMap l, normal use in China. I don’t know if it can be used in other regions. Please find the APRS program available in the current region to connect "R3-BLE" This manual download URL： http://avrtx.cn/ File Directory：R3 BH7NOR E-MAIL: bi7nor@yahoo.com ; yupopp@163.