Bluetooth ANC Honsenn Headphone STATUS LED AUX LINE-IN PORT MAIN MICROPHONE HS-BN928 TYPE-C CHARGING PORT ANC BUTTON POWER BUTTON BLUETOOTH BUTTON LED
X
FWK:tlon Operation Power on Press and hold the POWER button for 3 sec. Power off Press and hold the POWER button for 4 sec. Battery level Discon nect/Pairing PlayiPause Press the POWER button whilethe headset is on. Double tap on the Touch panel. Volume+ Swipe up on the Touch panel Volume Swipe dawn on the Touch panel. Nexttrack Previous track Swipe forward on the Touch panel SWipe backward on the Touch panel. Answer a phone call Press and hold the Bluetooth button for 3 sec.
Fwic:tlon Operation EnableAmbient When AN C mode is on, press the ANC button Sound mode once. When the ANC and Ambient Sound modes EnableANC are off, press the ANC button once. Disable SOund When the Ambient Sound mode is on, press Ambient e. on and ANC modes the ANC butt onc Awareness mode When the headphones are turned on, dose the right earcup with a palm. TUrnON Press the POWER button for 3 sec. You will hear the sound prompt and, a few seconds later, the "Bluetooth pairing on• voice prompt.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.