Automotive wireless charger HSP-C1 USER MANUAL 1. SPECIFICATION AND PACKING LIST Specification: Product Name:Magnetic wireless car charger Charging power:15W,10W,7.
USB interface: Type-C Packing list: Wireless car charger x 1 1m fast charging cable x 1 Base clip x 1 User manual x 1 User card x 1 2.
. PARAMETERS Model:HSP-C1 Weight:110g Material:ABS+ aluminum alloy Input Voltage/Current: 9V/2A Output Power:15W/10W/7.5W/5W automatic recognition Charging power:110.
Charging distance:0~8mm Compliant standard: QI Wireless Charging Standard Supported cell phones: iPhone12 Mini, iPhone12, iPhone12 PRO, iPhone12 PRO Max, iPhone13 Mini, iPhone13, iPhone13 PRO, iPhone13 PRO Max, 4.
. OPERATING PROCEDURE 1) Assemble the base clip into the back of the wireless car charger and fix it to the vehicle air conditioning outlet or other fixed position. 2) Insert the USB cable connector into the power input port of the wireless car charger. 3) Connect the USB charging cable to the vehicle USB output port (QC3.0/PD2.0 protocol support is recommended). 4) After the car is started,the LED is lighted in red at first and then flicker in red and blue alternately when in self-checking state.
charger, and the clip automatically clamps the phone. 6) The cell phone is now being charged, the LED light turns into blue and keeps in breathing light status. 7) When need to take the cell phone off,just finger touch the designed position of the charger, the clip will automatically release the phone. 6. ATTENTION: This product only works with iPhone 12/13 series cell phones,does not support other cell phone models. Maximum supported charging power is 7.5W, need to use QC3.
than 1.2mm. Another option is to use magnetic protective case。 You may feel the cell phone is a little bit hot, it’s normal and the temperature should be still under 40˚C,the product has over-heat protection mechanism designed in and will stop charging if temperature reaches 60˚C. Input power voltage must be lower than 12V. Do not squeeze and impact the wireless charger dramatically.
FCC Statement This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment.