Assembly Instruction

1/3

ASSEMBLY INSTRUCTION

ITEM# 3016-90866 6/0-6/6 Tufted Headboard-Bling (A)

3016-90862 6/0 Bling Footboard (B) & Rails(C)

Caution: Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more persons.

Diagram 1

SEE DIAGRAM 1

SEE DIAGRAM 2

SEE DIAGRAM 3

PAGE 1
ASSEMBLY INSTRUCTION ITEM# 3016-90866 6/0-6/6 Tufted Headboard-Bling (A) 3016-90862 6/0 Bling Footboard (B) & Rails(C) Caution: Please make sure you have all parts indicated below prior to assembly. This unit is heavy and can best be assembled with the help of two or more persons.
PAGE 2
Assembly steps: 1. Insert 2 bolts (F) into holes of each post on Headboard (A) and Footboard (B), attach the end of side rails (C) to the bolts (F) on posts using 2 curved washers (G) and 2 nuts (H), tighten nuts (H) securely with spanner wrench (I). (See diagram 1) Diagram 2 2. Take out center supports (E) from rail box, place center supports (E) under slats(D) by using 2 bolts (M), 2 lock washers (N) and 2 flat washers (O). Secure the bolts (M) by using allen wrench (L) in clockwise direction.
PAGE 3
Note: You can change the height of slat by adjusting the height of cleat on side rail as shown in diagram 4 1. remove the bolt (Q), lock washer (R) and flat washer (S) from the cleat by turning the bolt (Q) with allen wrench (P) in anti-clockwise direction, adjust the cleat to a desired position, and then secure the lock washer, flat washer, bolt in a clockwise direction by turning with allen wrench(P).