Assembly Instructions

1/2

ASSEMBLY INSTRUCTION

Item#: 500-50-828 Round Accent Table

*** Please make sure you have all parts indicated below prior to assembly.

HARDWARE LIST

Q'TY

Wood Dowel

Full Threaded Bolt

Wrench

Nut

Allen Wrench

Bolt

Lock Washer

Flat Washer

Assembly steps:

1. Attach the mounting bridge (J) to the post (K) with 2 flat washers (A), 2 lock washers (B) and

2 bolts (C). Tighten all bolts securely with allen wrench (D) (See diagram 1).

2. Insert 3 full threaded bolts (G),3 wood dowels(H) to legs, assemble legs to post by using 3 flat

washers (A), 3 lock washers (B), 3 nuts(E) and turn with wrench (F) in a clockwise direction

(see digram2).

Diagram 1

Diagram 2

Diagram 3

PAGE 1
ASSEMBLY INSTRUCTION Item#: 500-50-828 Round Accent Table HARDWARE LIST Q'TY A B E Flat Washer Lock Washer Bolt Allen Wrench Nut 8 8 5 1 3 F G H Wrench Full Threaded Bolt Wood Dowel 1 3 J K Diagram 1 ABCD 3 AB E F C D A BC NO D *** Please make sure you have all parts indicated below prior to assembly. G H Diagram 2 Diagram 3 Assembly steps: 1. Attach the mounting bridge (J) to the post (K) with 2 flat washers (A), 2 lock washers (B) and 2 bolts (C).
PAGE 2
3. Place table top upside down on a soft surface to prevent from scratching. 4. Align the holes on the top with the one on the mounting bridge, attach with 3 flat washers (A), 3 lock washers (B) and 3 bolts (C). Tighten all bolts securely with allen wrench (D) (See diagram3). Caution: Do not over tighten. Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth. polish the finish with soft cloth and an industry recognized furniture polish.