Grandover Tilt Swivel Chair Assembly Instruction

1/2

ASSEMBLY INSTRUCTION

Item#: 5029-30220 TILT SWIVEL CHAIR

*** Please ensure you have all parts indicated below prior to assembly.

This item should be assembled on a flat, soft surface to prevent from scratching the

finish while assembling.

、

1. Insert the Pneumatic Cylinder into the base, this is

a taper fit no mechanical fastening is necessary.

Note: Casters (H) are removable.

2. Place Cylinder cover over the cylinder

PAGE 1
ASSEMBLY INSTRUCTION Item#: 5029-30220 TILT SWIVEL CHAIR *** Please ensure you have all parts indicated below prior to assembly. This item should be assembled on a flat, soft surface to prevent from scratching the finish while assembling. 1. Insert the Pneumatic Cylinder into the base, this is a taper fit no mechanical fastening is necessary. Note: Casters (H) are removable. H 、 2.
PAGE 2
3. Use the Allen Wrench (C) with 4 bolts (D), 4 lock washers (E), 4 Flat Washers (F), attach the ergonomic mechanism to the bottom of the seat. Please note the correct direction to place the tilting mechanism, follow the left diagram. 4. Place the chair body onto the Cylinder. No mechanical fastening is necessary because this is a taper fit. Now sit in the chair. This will firmly secure the taper fit.