Installation Sheet

ASSEMBLY INSTRUCTION

(for connecting the wire of the light on this curio)

Item#: 5070-50001 Bunching Curio

*** Caution: Please read all instructions carefully before starting the assembly process.

Please note the curio can be used alone with can light on by a touch dimmer. Also, when 2or more are

bunched together, you can control all can lights by touching one dimmer.

DIAGRAM 1 DIAGRAM 2

PAGE 1
ASSEMBLY INSTRUCTION (for connecting the wire of the light on this curio) Item#: 5070-50001 Bunching Curio *** Caution: Please read all instructions carefully before starting the assembly process. Please note the curio can be used alone with can light on by a touch dimmer. Also, when 2or more are bunched together, you can control all can lights by touching one dimmer.
PAGE 2
Assembly steps: 1. When each piece of curio is used alone, attach male connector of the power switch (A) to a wall plug. (see diagram 1) 2. Touch the dimmer at the right top of door hinge, the can light of it will be on. 3. If you want to bunch 2 or more curios together, place them all side by side in a desired location. 4. Leave male connector of the bulb (C ) and female connector of power Switch (B) for the first curio (#1) as it is.