Assembly Instructions

3/3
Note: You can change the height of slat by adjusting the height of cleat on side rail as shown in
diagram 4. Remove bolt (I), lock washer (O) and flat washer (J) from the cleat by turning the
bolt (I) with allen wrench (M) in anti-clockwise direction. Adjust the cleat to a desired position,
and then secure lock washer, flat washer, bolt in a clockwise direction by turning with allen
wrench.
Diagram 4
You can adjust the height of center supports (L) as shown in Diagram 5 to meet your need by the
following steps.
1. Unscrew bolts on center supports (L) with allen wrench (R).
2. Adjust the height of center supports, align the holes on 2pcs of woods and tighten them together
with 2 bolts (Q), 2 lock washers (V) and 2 flat washers (U) by turning with allen wrench (R) in a
clockwise direction.
Diagram 5
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp
cloth. Polish the finish with soft cloth and an industry recognized furniture polish.