Assembly Instructions

2/2
2.Attach the ends of stretcher (G) to side frames ( F & H ) to make sure all pre-drilled holes
are in alignment, well insert bolts (E), lock washers (B) and flat washers (A), tighten all
bolts by turning with allen wrench (D) in clockwise direction (See Diagram 2).
3. Tighten all bolts.
4.Turn table upright.
Instruction for table leaves:
1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 3.
2. Pull out table top as the arrow direction shown in Diagram 4.
3. Place table leaves between and push table tops together.
4. Turn on latches. (see Diagram 3)
5. Take opposite actions to remove table leaves.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 2
Diagram 3
Diagram4