Assembly Instructions

Style No.: EC392 Assembly Instructions

Carefully unpack all parts and identify them with parts list before

attempting to assemble the chair.

IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL

YOU HAVE COMPLETED THE FINAL ASSEMBLY.

1. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B).

2. Insert GAS LIFT (C) to the center hole top of 5 STAR BASE (B), and

put the BELLOWS(D) onto the GAS LIFT(C).

3. Attach SEAT PLATE (F) to the Unit Seating(G) by using 4 SCREWS

(E) with 4 FLAT WASHERS (E1).

4. Insert the pre-assembled seat unit onto the gas lift to finish the final

assembly.

5. Be sure that all the screws are fully tightened before using.

Parts List

A. CASTERS 5

B. 5 STAR BASE 1

C. GAS LIFT 1

D. BELLOWS 1

E. SCREWS (5/16”x1-1/4”)

E1. FLAT WASHERS

F. SEAT PLATE 1

G. UNIT SEATING

H. ALLEN KEY

PAGE 1
Style No.: EC392 Assembly Instructions Carefully unpack all parts and identify them with parts list before attempting to assemble the chair. IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL YOU HAVE COMPLETED THE FINAL ASSEMBLY. G 1. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B). 2. Insert GAS LIFT (C) to the center hole top of 5 STAR BASE (B), and put the BELLOWS(D) onto the GAS LIFT(C). 3. Attach SEAT PLATE (F) to the Unit Seating(G) by using 4 SCREWS (E) with 4 FLAT WASHERS (E1). 4.