Installation & Assembly

1/3

ASSEMBLY INSTRUCTION

ITEM# 5070-90567 6/6 Tufted Headboard (N)

5070-90568 6/6 Tufted Footboard (C)

5070-90569 6/6 Tufted Rails (C)

5070-90563 6/0 Tufted Rails (C)

Caution: Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more persons.

NO.

HARDWARE LIST

Q'TY

NUT

SPANNER WRENCH

CURVERD WASHER

FULL THREADED BOLT

SCREW

4mm ALLEN WRENCH

5mm ALLEN WRENCH

BOLT

LOCK WASHER

FLAT WASHER

Diagram 1

See Diagram 1

See Diagram 2

See Diagram 3

See Diagram 5

PAGE 1
ASSEMBLY INSTRUCTION ITEM# 5070-90567 6/6 Tufted Headboard (N) 5070-90568 6/6 Tufted Footboard (C) 5070-90569 6/6 Tufted Rails (C) 5070-90563 6/0 Tufted Rails (C) Caution: Please make sure you have all parts indicated below prior to assembly. This unit is heavy and can best be assembled with the help of two or more persons. Q'TY HARDWARE LIST NO.
PAGE 2
Assembly steps: 1. Insert 2 bolts (H) into holes of each post on Headboard (A) and Footboard (B). Attach the end of side rails (C) to bolts (H) on posts using 2 curved washers (G) and 2 nuts (E). Tighten nuts (E) securely with spanner wrench (F). (See diagram 1) Note: Please make sure the end of side rail with rail must be placed on top when assembling 6/0 upholstered rails. (See diagram 7) R Q V U D L Diagram 2 Diagram 7 2. Take out center supports (L) from the rail box.
PAGE 3
. Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail (C), using screws (K) to tighten both. (See diagram 3) Note: You can change the height of slat by adjusting the height of the cleat on side rails as shown in diagram 4.