Assembly Instructions

ASSEMBLY INSTRUCTION
Item# 1610-75203-WH 48in Round Leg Table w/1-20in leaf
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people.
Assembly Steps:
1. Place table top upside down on a soft surface to prevent it from scratching.
2. Follow numbers on legs and corner blocks accordingly. Attach Legs to table top by using bolts
(C), lock washers (B) and flat washers (A), tighten all bolts (C) with allen wrench (D). (See
diagram 1)
Instruction for table leaf:
1. There are latches at the bottom of table top, turn off the latch as shown in diagram 2.
2. Pull out table top as the arrow direction shown in diagram 3.
3. Place table leaf between and push table tops together. Then turn on latches.
4. Take opposite actions to remove table leaf.
5. Turn table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 1
Diagram 2
Diagram 3