Assembly Instructions

1/3

ASSEMBLY INSTRUCTION

ITEM#1610-90151-EGLO 5/0 Mirrored Panel Headboard

1610-90152-EGLO 5/0 Mirrored Panel Footboard

1610-90167-EGLO 6/0-6/6 Mirrored Panel Headboard

1610-90168-EGLO 6/0-6/6 Mirrored Panel Footboard

1610-90153-EGLO 5/0-6/6 Rails

1610-90163-EGLO 6/0 Rails

Caution: Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more persons.

Diagram 2

Diagram 5

Diagram 1

Diagram 3

PAGE 1
ASSEMBLY INSTRUCTION ITEM#1610-90151-EGLO 5/0 Mirrored Panel Headboard 1610-90152-EGLO 5/0 Mirrored Panel Footboard 1610-90167-EGLO 6/0-6/6 Mirrored Panel Headboard 1610-90168-EGLO 6/0-6/6 Mirrored Panel Footboard 1610-90153-EGLO 5/0-6/6 Rails 1610-90163-EGLO 6/0 Rails Caution: Please make sure you have all parts indicated below prior to assembly. This unit is heavy and can best be assembled with the help of two or more persons.
PAGE 2
Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails. Assembly steps: 1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the end of side rails (C) to bolts (H) on posts using 2 curved washers (G)and 2 nuts (E), tighten nuts (E) securely with spanner wrench (F). (See diagram 1) Diagram 1 2.
PAGE 3
Diagram 3 Note: You can change the height of slat by adjusting the height of cleat on side rail as shown in diagram 4. Remove bolt (I), lock washer (W) and flat washer (J) from the cleat by turning the bolt (I) with allen wrench (M) in anti-clockwise direction. Adjust the cleat to a desired position, and then secure lock washer, flat washer, bolt in a clockwise direction by turning with Allen wrench.