Assembly Instructions

4. Insert the stretcher
（
P
）
into
center hole of table base leg
(O) fix it by using bolt (B), lock
washer (C) and flat washer
(D). Tighten them securely
with allen wrench (A). (See
diagram 3)
5. Repeat step 4 to install
another side stretcher(p) into
table legs. Tighten them on
stretcher(P) left side securely
with threaded rod(F),lock
washer(K),flat washer(L) and
rubber gasket(J).Securely
them on the stretcher (P) right
side with leveler wrench (H),
nut (I), flat washer (L) and
rubber gasket (J). Securely
them on center leg with
leveler wrench (H),bolt
(G) ,lock washer(K),flat
washer(L) and rubber gasket
（J）. (See diagram 4)
6. Turn the table top upright. If
you want to place the leaf on
the table, please turn the
switch to “off” position
underneath top panel. Then
pull out two ends of top panel,
place it on top and push them
together, turn the switch to
“ON” position.
(See diagram 5&6).
7. When you adjust the table
top, please be sure to
unstrengthen bolt (G) on
center leg first.
Diagram3
Di
agram4
Diagram5&6
O