Assembly Instructions

ASSEMBLY INSTRUCTION

Item#: 1620-75200-LTBR 72in Metal Leg Table w/2-22in leaves

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more persons.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water

solution. Polish the finish with soft cloth and an industry recognized furniture polish.

Diagram 1

Assembly Steps:

1. Place table top (G) upside down on a soft

surface to prevent it from scratching.

2. Attach one side of leg frame (F) as labeled to

table top(G) by using bolts (C), lock washers

(B) and flat washers (A). Tighten them

securely with allen wrench (D).

(See diagram 1)

3. Screw the rail between the leg frame to apron

of table top (G) by using bolts (E), lock

washers (B) and flat washers (A) tightly with

allen wrench (D).

4. Repeat step 2 & 3 to assemble another side of

leg frame

5. Upright the whole table with care.

Diagram 2

Instruction for leaves:

1. There are latches at the bottom of table top,

turn off the latch as shown in diagram 1.

2. Pull out table top as the arrow direction

shown in diagram 2

3. Place leaves between and push table tops

together. Then turn on latches.

4. Take opposite actions to remove table

leaves.

PAGE 1
ASSEMBLY INSTRUCTION Item#: 1620-75200-LTBR 72in Metal Leg Table w/2-22in leaves ** Please make sure you have all parts indicated below prior to assembly. This table is heavy and can best be assembled with the help of two or more persons. Assembly Steps: 1. Place table top (G) upside down on a soft surface to prevent it from scratching. F 2. Attach one side of leg frame (F) as labeled to table top(G) by using bolts (C), lock washers (B) and flat washers (A). Tighten them securely with allen wrench (D).