Assembly Instructions

2/2
1. Attach the mounting bridge (E) to base (F) in 45 degree angle by using bolts (A), lock washers
(B) and flat washers (C). Tighten all bolts (A) by turning with allen wrench (D) in a clockwise
direction. (See Diagram 1)
2. Attach table top (G) to table base (F) by using bolts (A), lock washers (B) and flat washers (C).
Tighten all bolts (A) by turning with allen wrench (D) in a clockwise direction. (See Diagram 2)
Assembly instruction for table leaf:
1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 3.
2. Pull out table top as the arrow direction shown in Diagram 4.
3. Place table leaves between and push table tops together.
4. Turn on latches. (See Diagram 3)
5. Take opposite actions to remove table leaves.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 3
Diagram 4