Assembly Instructions

1/1
ASSEMBLY INSTRUCTION
Item#:3005-85004 THREE-DRAWER THIN CONSOLE (EBONY/DRIFT)
** Please make sure you have all parts indicated below prior to assembly.
65mm[2 1/2]
75.4mm[3]
C
D
65mm[21/2]
75.4mm[3]
A
B
D
A
B
C
C
Diagram 1
Diagram 2
Assembly Steps:
1. Place console top upside down on a soft surface to prevent from scratching top.
2. Attach middle posts (C) to console top (D) in a clockwise direction (See Diagram 1).
3. Put bottom panel (B) on posts; insert bun feet (A) to posts through bottom panel in a clockwise
direction (See Diagram 2).
4. Turn the console upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.