ASSEMBLY INSTRUCTION HQQ EIE
B Pneumatic cylinder{H) 5 Upper cylinder cover(J) | \ EB Bottom cylinder cover(l) STEP 2. Insert the pneumatic cylinder(H) and cylinder covers Into the bass, this ls a taper fit no mechanical fastening Is necessary. STEP 3. Attach the 5 wood cover to the chair base(G) with screws(B) STEP 4. Use the Allen key(A) with 4 bolts(E), 4 lock washers(C), 4 flat the ergonomic mechanism(K) to the bottom of the seat. Please note correct direction to place the tilting mechanism, \ follow diagram at left.
STEP 5. Place the chair body on 1o the cylinder. No mechanical fastening s necessary because this s a taper fit. Now sit In the char. This will firmly secure the taper fit. Seat height and tilt can be adjusted using the seat height lever at right: The asst can be adjusted so that your feet comfortably flat on the floor. To lower the seat: While seated, reals the seat height lever, the char will lower with your body weight.The seat height lever will lock Into place when your release the lever.