Assembly Instructions

ASSEMBLY INSTRUCTION
Item#: 5805-80110-80 Cocktail Table
5805-80113-80 Square End Table
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two persons.
5805-80110-80 5805-80113-80
Center Bun Feet Side Bun Feet
Assembly Steps:
1. Put table top upside down on a soft surface to prevent it from being scratched (See Diagram
1).
2. Screw posts (A) into table top in clockwise direction (See Diagram 2).
3. Well place bottom stretcher (B) onto posts (A) to make sure all pre-drilled holes are in
alignment. Screw side bun feet (C) into posts through bottom stretcher (B) in clockwise
direction (See Diagram 3).Then Screw center bun feet (D) into the middle of stretcher (B) in
clockwise direction (See Diagram 4).
4. Turn table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 3
Diagram 4
Diagram 2
Diagram 1