Assembly Instructions

STEP 1.Attach the threaded bolts (A) into the two threaded holes that are at the

bottom of the posts of Bolt the Headboard and the Footboard. Slide the

Bed Rail onto the two Bolts (A) on one of the bed posts until the Bolts (A)

are visible through the holes on the inside of the Bed Rail.

STEP 2.Slide a Curved Washer (B) and a Nut (C) onto the Bolts (A) through the

holes in the Bed rail. Tighten all the Nuts (C), using the Open Wrench(D).

STEP 3.Assemble the leg supports to the bed slats.

STEP 4.Mount the assembled support slats onto the side rail with screws (E).

Then use a Phillips head screwdriver to tighten screws

STEP 1,2

STEP 3

STEP 4

PAGE 1
STEP 1.Attach the threaded bolts (A) into the two threaded holes that are at the bottom of the posts of Bolt the Headboard and the Footboard. Slide the Bed Rail onto the two Bolts (A) on one of the bed posts until the Bolts (A) are visible through the holes on the inside of the Bed Rail. STEP 2.Slide a Curved Washer (B) and a Nut (C) onto the Bolts (A) through the holes in the Bed rail. Tighten all the Nuts (C), using the Open Wrench(D). STEP 3.Assemble the leg supports to the bed slats. STEP 4.